Panasonic WJ-SX550C Operating Instructions Manual page 72

Alarm Mode Select
There are 5 Alarm modes available: Mode-1, Mode-2, Mode-3, Off mode and Timer mode.
In Alarm mode-1, all alarm inputs are displayed in sequential order on monitor 1.
In Alarm mode-2, all alarm inputs are displayed in sequential order on monitors 1 through 4.
In Alarm mode-3, any alarm input can be displayed on any monitor, along with presets (if applicable) and Auxiliary 1 and 2
control.
r
To program or edit an Alarm Mode Select, do the following:
4
1. Move the cursor to position 4 by moving the Joystick Controller, then press the CAM (SET) key to execute the selection.
2. Move the cursor to position 5 by moving the Joystick Controller.
Press the Function F4 button to open the Pop Up Window.
Select the desired alarm mode by moving the Joystick Controller, and then press the CAM (SET) key to execute the selec-
tion.
3. Move the cursor to position 6 by moving the Joystick Controller.
Press the Function F4 button to open the Pop Up Window.
Select camera site alarm input On or Off by moving the Joystick Controller, and then press the CAM (SET) key to execute
the selection.
4. Move the cursor to position 7 by moving the Joystick Controller.
Press the Function F4 button to open the Pop Up Window.
Select alarm board input On or Off by moving the Joystick Controller, and then press the CAM (SET) key to execute the
selection.
5. Move the cursor to position 8 by moving the Joystick Controller.
Press the Function F4 button to open the Pop Up Window.
Select alarm display On or Off on the monitor by moving the Joystick Controller, and then press the CAM (SET) key to exe-
cute the selection.
6. Press the MON (ESC) key to escape from the programming mode.
The cursor returns to position 4.
76
q w e
S e t U p P R O G . A l a r m
A l a r m M o d e S e l e c t
A l a r m M o d e
A l a r m I n p u t S i t e ( C a m e r a )
B o a r d ( A l a r m )
A l a r m D i s p l a y
F 1 : - - F 2 : - -
t y u i
S E L .
M o d e 1
O n
O f f
O n
F 3 : D E L F 4 : P o p U p