Omron H5CC Manual page 6

H5CC
Item
Classification
Power supply voltage
Allowable voltage
Ratings
fluctuation range
Power consumption
Mounting method
External connections
Degree of protection
Time range
Timer mode
Input signals
Inputs Input method
Signal, reset, gate
Reset system
Power reset
Reset voltage
Sensor waiting time
Output modes
Outputs
Output type
Display
Memory backup
Operating temperature range
Storage temperature range
Operating humidity range
Case color
Attachments
*1. Inrush current will flow for a short time when the power supply is turned ON.
Inrush Current (Reference Values)
Voltage
12 to 48 VDC/24 VAC
*2. The display is lit only when the power is ON. Nothing is displayed when power is OFF.
6 6
Models
Digital Timer with two-stage setting, and forecast output
12 to 48 VDC/24 VAC 50/60 Hz
85% to 110% of rated supply voltage (90% to 110% at 12 to 48 VDC)
Approx. 5.32 VA/3.17 W at 24 VAC/12 to 48 VDC *1
Flush mounting
Screw terminals
IEC IP66 for panel surface only and when Y92S-P6 Waterproof Packing is used
0.001 s to 999.999 s, 0.01 s to 9999.99 s, 0.1 s to 99999.9 s, 1 s to 999999 s, 1 s to 99 h 59 min 59 s,
0.1 min to 99999.9 min, 1 min to 999999 min, 1 min to 9999 h 59 min, 0.1 h to 99999.9h, 1 h to 999999 h
Elapsed time (Up)
Signal, reset, gate
No-voltage (NPN) input/voltage (PNP) input (switchable)
No-voltage input ON impedance:
ON residual voltage: 3 V max.
OFF impedance:
Voltage input High (logic) level:
Low (logic) level:
Minimum input signal width: 1 or 20 ms (selectable, same for all input)
Power resets (only for A mode), external and manual reset
Minimum power-opening time: 0.5 s (except for F-1 mode)
10% max. of power supply voltage
250 ms max. (Control output is turned OFF and no input is accepted during sensor waiting time.)
A, F-1
Transistor output: NPN open collector,
100 mA at 30 VDC max.
residual voltage: 1.5 VDC max. (Approx. 1 V)
Leakage current: 0.1 mA max.
7-segment, negative transmissive LCD;
Present value: 10-mm-high characters, white Set value: 6-mm-high characters, green *2
No-volatile memory (overwrites: 100,000 times min.)
that can store data for 10 years min.
-10 to 55°C (-10 to 50°C if timers are mounted side by side) (with no icing or condensation)
-25 to 70°C (with no icing or condensation)
25% to 85%
Black (N1.5)
Waterproof packing, flush mounting adapter, terminal cover
Inrush current
Applied voltage
(peak value)
52.8 VAC 13.6 A
42.8 VDC 12.9 A
H5CC-AWSD
1 kΩ max. (Leakage current: 12 mA when 0 Ω)
100 kΩ min.
4.5 to 30 VDC
0 to 2 VDC (Input resistance: approx. 4.7 kΩ)
Time
0.88 ms
0.80 ms