Table of Contents
Advertisement
H5CC
Timer
Mode S: Stopwatch (Timer resets when power comes ON.)
Basic operation
Power
Start signal
input
Timing
Gate/Reset
*
Display
(for elapsed
*
RST
time)
The signal starts and stops timing.
The display is held and timing is continued if the reset or
gate input is received during timing operation.
The timer resets if the reset or gate input is received
when the timing operation is stopped.
Note: Output is instantaneous when setting is 0.
H5CC-L8E@
Mode A-2: Power ON delay (Timer resets when power comes ON.)
Basic operation
Power
Timing
Time-limit
output
Instantaneous
output
The Timer starts when the power comes ON or when
the reset input goes OFF.
Note: Output is instantaneous when setting is 0.
Mode b: Flicker I (Timer resets when power comes ON.)
Basic operation
Power
t (time)
t (time)
Time-limit
output
Instantaneous
output
The Timer starts when the power comes ON or when
the reset input goes OFF.
Note: Normal output operation will not be possible if
the set time is too short.
Set the value to at least 100 ms.
Note: H5CC-L8E@ Precautions
Set the Timer's set value before using the Timer in a self-holding circuit.
24 24
Detailed operation
Start signal
Gate/Reset
999999
Set time
UP
flashes
Set time
DOWN
Detailed operation
Power
Reset Key
Time-limit
contacts, NC
Time-limit
contacts, NO
Instantaneous
contacts, NC
Instantaneous
contacts, NO
Detailed operation
t (time)
t (time)
contacts, NC
Sustained Output
contacts, NO
contacts, NC
One-shot Output
contacts, NO
Instantaneous
contacts, NC
Instantaneous
contacts, NO
Power
0
0
Output
t-a
t
t = Set time, Rt = Reset time (0.5 s min.), t – a < t (Indicates the time is less than the set time.)
t-a
t
t
t
Power
Reset Key
Time-limit
Time-limit
Time-limit
Time-limit
t = Set time, Rt = Reset time (0.5 s min.), t – a < t (Indicates the time is less than the set time.)
Either one-shot output or sustained output can be selected.
Rt
t
t-a
Rt
t-a
Rt
t
t
t
t-a
t-a
t-a
Rt
t-a
Advertisement
Table of Contents
