Receiving A Call; Receiving A Call At The Master Station; Receiving A Call At The Door Station; Station Speaker Volume - Aiphone AN-8000 Operating Instructions Manual

1.3. Receiving a Call

1.3.1. Receiving a call at the master station

Step 1. Responding to a Received Call.
1-1. If the called station is set to Automatic connection
mode, the call tone sounds only once, after which
the calling party's voice is heard immediately
through the internal speaker. Respond by
speaking into the station microphone or the
handset.
1-2. If the called station is set to Continuous call tone
mode, press any key for hands-free conversation
or lift the handset for handset conversation.
Step 2. When conversation is finished, press the Clear
key or replace the handset.

1.3.2. Receiving a call at the door station

When receiving a call from the master station, the call tone sounds only once, after which the calling party's
voice is heard immediately through the internal speaker. Respond by speaking into the door station.
Conversation termination operation cannot be executed at the door station.
Conversation can be terminated by the termination operation at the master station or after the preset time
limit.

1.4. Station Speaker Volume

The volume of the master station speaker can be preset (in five 3-decibel increments) using the supplied AN-
8000 software program, however it can also be adjusted at the station.
• Pressing the [ ] key during conversation increases the volume.
• Pressing the [ ] key during conversation decreases the volume.
Note
The resulting volume level will be maintained even after conversation is
finished.
Chapter 2: FUNCTIONS AND OPERATION
Master station
[Example]
5
C
or
or
2-4