Restarting The Exchange - Aiphone AN-8000 Operating Instructions Manual

Chapter 7: MULTIFUNCTIONAL STATION MENU SCREEN OPERATION (AN-8000MS/8500MS ONLY)
6.5. Restarting the Equipment
Restart the exchange or AN-8500MS* when network settings have been changed.
The exchange can be restarted at the Multifunctional Station even without pressing "Reset" key located on the
exchange's front panel.
* Exchange when the station performing restart is AN-8000MS, and the AN-8500MS itself when it is the AN-
8500MS.
Note
Before restarting the exchange, ensure that no paging, conversation, or firmware update is in progress.
Step 1. Using the up or down arrow keys or the [4] key on the
maintenance screen, move the cursor to "4:Reset EX."
Step 2. Press the Select key to display verification screen.
Step 3. Pressing the left or right arrow keys, move the cursor to
"Yes."
Step 4. Press the Select key to revert the screen to Step 1,
then the Exchange or AN-8500MS restarts.
Dialing operations are refused during restarting.
When restart has been completed, the display returns
to its normal standby mode.
3 : C l o c k s e t t i n g
4 : R e s e t E X
R e s e t E X . O K ?
Y e s N o
R e s e t E X . O K ?
Y e s N o
3 : C l o c k s e t t i n g
4 : R e s e t E X
8 : 2 2 A M
2 0 0 0
7-8