3.2. On-Wall Mounting
3.2.1. AN-8000MS/8010MS/8020MS/8500MS
The station can be mounted on a wall using an optional YC-280 Wall-mounting bracket.
The YC-280 can be installed to a one-gang electrical box.
[Mounting example]
Station
The figure shows the AN-8000MS.
Step 1. Install the YC-280 wall mounting bracket to the wall.
Notes
• Use the appropriate screws for the construction of wall.
• Wood screws 3.5 x 20 are supplied with the YC-280.
• No fitting screws for electrical box are supplied with.
Use commercially available screws.
Step 2. Hang the station on the wall mounting bracket hook to install.
Push down the station main body in the direction indicated by the arrow.
Wall
surface
2
1
Wood screw 3.5 x 20
(supplied with the YC-280)
Chapter 3: INSTALLATION & WIRING
YC-280 Wall mounting bracket
Hook
3-9