Changing System Names And Passwords; Uploading Setting File - Aiphone AN-8000 Operating Instructions Manual

10.1. Changing System Names and Passwords

When adding an exchange, multi interface unit, or IP station, or initializing exchange, multi interface unit, or IP
station settings, the system name and password can be changed remotely using the browser even from
locations where the system settings PC is not available.
• Set the same system name and password as previously set using the AN-8000 software. The AN-8000
software cannot be used for centralized administration if different passwords have been used within the
same system.
Step 1. Enter a new system name in "System Name box."
Enter a new system name up to fifteen characters long. This name is case-sensitive, and cannot
include colons (:).
Step 2. Enter a new password in the "New Password" box.
Enter a new password up to fifteen characters long. This password is case-sensitive, and cannot
include colons (:).
Step 3. Enter a new password that has been entered in step 2 in "New Password (confirmation)" box for
confirmation.
Step 4. Press User Data Change button.
Note
The status indicator located on the exchange, multi interface unit, or IP station remains lit during
update. Do not restart the system or turn off the power while this light is on.

10.2. Uploading Setting File

Step 1. Press "Browse..." button to display "File Selection" dialog.
Step 2. Select "Backup file (extension cfg)", then press "Open" button.
Step 3. Press "Upload" button.
Note
The status indicator located on the exchange, multi interface unit, or IP station remains lit during
update. Do not restart the system or turn off the power while this light is on.
Chapter 6: SYSTEM SETTINGS USING THE BROWSER
6-22