Door Remote Control (Only When The An-8050Ds/8540Ds/8000Mi Is Used) - Aiphone AN-8000 Operating Instructions Manual

4.6. Door Remote Control (only when the AN-8050DS/8540DS/N-8000MI is used)
AN-8050DS/8540DS's contact outputs can be shorted for a set period of time by the dial operation at the
master station engaged in conversation with the AN-8050DS Door Station or AN-8540DS IP Door Station.
Similarly, the Multi interface unit's contact outputs can be shorted for a set period of time by the dial operation
at the master station engaged in conversation with a station.
For example, a door lock can be controlled by connecting the contact outputs to an electronic lock system.
Use the supplied AN-8000 Software to perform settings for the one shot make duration and the AN-8000MI's
contact output corresponding to each station. (Refer to
[Operation]
Step 1. Press the Transfer key during a conversation.
Current conversation is placed on hold, transmitting a hold tone to other party.
Step 2. Press the Function key and [0] key.
Contact outputs of AN-8050DS/8540DS in conversation or the station's corresponding AN-8000MI's
contact outputs can be shorted for a set period of time.
For example, the corresponding door lock can be released if contact outputs are connected to an
electronic lock system.
Step 3. A confirmation tone sounds, and the original conversation is restored.
[Example of AN-8050DS/8540DS operation]
Operation at a Master station
[Example of AN-8000MI operation]
Operation at a Master station
0
0
Chapter 2: FUNCTIONS AND OPERATION
p. 5-27, p. 5-33, p. 5-42,
Door lock
control
AN-8050DS/8540DS
Door lock
control
p. 5-44, p. 5-48.)
Contact output
AN-8000MI
Contact output
2-34