1.3. Wall Mounting
Step 1. Install the supplied wall-mounting bracket to the Exchange using each 2 supplied screws and
removed screws from the case.
Step 2. Mount the Exchange on the wall.
Notes
• Use appropriate screws for the construction of wall.
• Wood screws 3.5 x 20 are supplied with the AN-8000EX.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
Protect against disconnection (Power supply plug)
Unlock cable clip and run the power supply cord
through cable clip.
Note
Keep overall cable length between a power
supply plug and cable clip as short as possible.
Wood screw 3.5 x 20
(supplied with the AN-8000EX)
AN-8000EX
Tapping screw 3 x 8
(supplied with the AN-8000EX)
Power supply cord
Cable clip
Chapter 3: INSTALLATION & WIRING
Wall mounting bracket
(supplied with the AN-8000EX)
Tapping screw 3 x 8
(removed from the case)
Wall surface
3-4