Station Number Settings - Aiphone AN-8000 Operating Instructions Manual

Chapter 7: MULTIFUNCTIONAL STATION MENU SCREEN OPERATION (AN-8000MS/8500MS ONLY)

6.3. Station Number Settings

It is possible to set the station number for all stations and IP stations.
Step 1. Using the up or down arrow keys or the [2] key on
the maintenance screen, move the cursor to "2: Line
Attribute."
Step 2. Press the Select key to display the line attribute
setting screen.
Step 3. Enter the equipment number (01 to 80) of the
Exchange or IP station to be set with the dial keys
(2-digit number), then press the Select key.
Step 4. Use the up or down arrow keys or dial keys (2-digit
number) to select the line number (01 – 16) of the
line to be set, then press the Select key.
For IP stations, select the line number 01.
Step 5. Use the arrow keys or dial key to select the type of
station connected to the designated line, then press
the Select key.
The types of stations selectable at this point are as
follows.
Dial key
0 No programming
1 8000MS
2 8010MS
3 8011MS
4 8020MS
5 8031MS
6 8050DS
Selecting "No programming" only completes the
registration and reverts the screen back to Step2,
permitting the next Exchange number to be entered
for the line attribute setting.
Indication Type of stations
Multifunctional master station,
IP Multifunctional master station
Standard master station
Hands-free master station
Industrial-use master station
Flush-mount master station
Door station, IP door station
1 : N e t w o r k s e t
2 : L i n e A t t r i b u t e
L i n e a t t r i b u t e
E x c h a n g e N o . :
X
L i n e a t t r i b u t e
E x c h a n g e N o . : 2 4
E X 2 4 : L I N E 0 1
N o p r o g r a m m i n g
E X 2 4 : L I N E 0 1
N o p r o g r a m m i n g
E X 2 4 : L I N E 0 1
M u l t i f u n c t i o n
Corresponding model
Non
AN-8000MS/8500MS
AN-8010MS
AN-8011MS
AN-8020MS
AN-8031MS
AN-8050DS/8540DS
L i n e a t t r i b u t e
E x c h a n g e N o . :
7-6