System Setting Items And Default; General System - Aiphone AN-8000 Operating Instructions Manual

1. SYSTEM SETTING ITEMS AND DEFAULT

All system setting items except the auto-dialing programming can be set using the AN-8000 software.
Some setting items, however, can also be set on the browser or at stations. The browser can only make the
connected Exchange-, Multi interface unit-, or IP station-related items, while stations can only make the
connected Exchange- or their own stations-related items.
The following tables, classified according to the system setting items on the AN-8000 software, show items,
their default, and reference pages in this manual.
Note
For reference pages, "SW" represents the software, "BR" represents the browser, and "ST" represents a
station.

1.1. General System

Item
Contents
Equipment number
Equipment name
Station number digit
Station number
Station name
Network communications
ON or OFF between exchanges
Multicast communications
ON or OFF between exchanges
* Settings can only be performed from the AN-8000MS Multifunctional Master station and AN-8500MS IP
Multifunctional Master station.
Chapter 4: BEFORE PERFORMING SYSTEM SETTINGS...
Setting from Setting from
Software browser
Setting from
Default
station
1 –
AN-8000EX or
AN-8000MI
2
* Line 1: 10,
Line 2: 11, .... ,
Line 16: 25
Reference
page
p. 5-17
p. 5-17
SW: p. 5-17
BR: p. 6-5
p. 5-19
SW: p. 5-19
BR: p. 7-6
p. 5-19
p. 5-21
p. 5-22
4-2