Creating A New System - Aiphone IXG Series Quick Start Programming Manual

CREATING A NEW SYSTEM

Getting Started
If this is the first time launching Support Tool, the Create a New System screen will automatically appear.
Otherwise, navigate to File and select Create New System.
Enter the required configuration information above and fill in the Site, Installer, and Property Management
Company Information. This information is required and must be accurate to activate the IXG Mobile app.
Click to continue.
Finish
Site Settings
From the side menu, expand Site Settings. Starting from the top setting option, Site Information, use these
submenus to configure and customize the system.
Site Information
Site, Installer and End User information that is set when creating a new system can be found and edited here.
Building Information
Name the building (or buildings) in which the units and their stations will reside. Place a check mark in the Enable
column to add buildings. This is typically only needed in multi-building systems.
All ID and passwords should be
recorded and saved in a secure
location. Recovery of ID and
passwords may be difficult, or
impossible, in some situations.
The option to enable additional buildings will
only be available when Multiple Buildings is
selected on the Create a new system window.
3