Attaching A Stabilizing Wire; Screw For Nylon Clamp (Xtw3+10Jfjk) - Panasonic SC-ELS10 Operating Instructions Manual

Fix the speaker cables.
4
Press the speaker cables into the cable groove
provided in the stand.
The speaker cables must have a thickness of 3.0 mm
(1/8'') or less to fit into the cable groove.
 Cable groove
When using speaker cables that are thicker than
3.0 mm (1/8''), attach nylon clampers to the
speakers and use them to fix the cables.
Example:
 Nylon clamp (included)
 Screw for nylon clamp (included)
 Speaker cables
Repeat steps 1 to 4 and assemble the front
speaker L and surround speaker R.

Attaching a stabilizing wire

Example:
 Remove the cover
 Wire (not included)
 Ring (not included)
 Screw (not included)
The wall on which the speakers are to be mounted and the
screws  (not included) used for installing the speakers must be
strong enough to support a weight of at least 65 kg (143 lb.).
Consult the contractor in charge of the work.
※ A screw which is at least 35 mm (1-13/32'') long is used when
installing the speaker on a wooden post or pillar. In all other
cases, use a screw which is strong enough to support a weight
of at least 65 kg (143 lb.).
ø7.0 to 9.4 mm
(9/32" to 12/32")
ø4 mm
(3/16")
11
RQT8979