Table of Contents
Advertisement
See page 38 for receiver operations.
Making MULTI ROOM
setting
• When SH-FX80 (sold
separately) is connected
(á page 24) .
Changing the digital
input settings
• Change these settings to
suit the connections you
have made to the digital
input terminals.
• You can only allocate one
piece of equipment per
terminal.
Example: "OPT 1 " becomes the
only digital terminal you can use
for connecting the DVD player to
the unit when you change the
DVD setting to the terminal.
Setting input signals
• You can fix the signal type
(digital, analog or PCM)
supplied by such equipment
as the DVD recorder and the
DVD player or make the unit
identify the input signal
type.
• Select "AUTO " when it is
not necessary to fix the
signal.
Reducing standby
power consumption
(power saving standby
mode)
1 Select and confirm the choice.
2 Select and confirm the choice.
Note
• See page 29 to enjoy music with MULTI ROOM.
• Settings made with the setup microphone are canceled when
you change the "SURR SPKR " or "MULTI ROOM " setting.
1 Select and confirm the choice.
2 Select the equipment connected to the digital
input terminal and confirm the choice.
3 Change the digital input setting and confirm
the choice.
Repeat steps 2 and 3 to change settings.
1 Select and confirm the choice.
2 Select the equipment connected to the digital
input terminal and confirm the choice.
3 Select the method for identifying input signals
and confirm the choice.
Repeat steps 2 and 3 to change settings.
PCM FIX mode
• In rare cases, the unit may have trouble recognizing the digital
signals on discs.
• Use this mode when, for example, the beginning of a playing CD
track is cut off.
• You do not need to set the mode when playback is normal.
• When PCM FIX mode is on, the unit cannot process other signals.
Cancel the mode when noise occurs.
Note
• "DIGITAL INPUT" stays on the display when you fix the input signal as digital.
• "PCM" appears on the display when you set the input signal as "PCMFIX ".
• "PCM FIX " flashes on the display when the unit is in the PCM FIX mode and a non-PCM source
is input through digital (OPTICAL or COAXIAL) connections.
1 Select and confirm the choice.
2 Select and confirm the choice.
3 Select and confirm the choice.
Note
When you select "OFF ", the following becomes applicable.
• Standby power consumption becomes 0.3 W.
• Standby through with HDMI connections (á page 15) does not work.
• EZ Sync "HDAVI Control" (á page 32) is canceled (when the unit is off).
MULTI ROOM :
when SH-FX80 is connected
SURR SPKR :
when SH-FX50/SH-FX60 is
connected
Factory setting: SURR SPKR
TV :
TV
DVR : DVD recorder
DVD : DVD player
CD :
CD player
Factory setting:
TV ;
OPT1 (OPTICAL1)
DVR ; OPT2 (OPTICAL2)
DVD ; COAX1 (COAXIAL1)
CD ;
COAX2 (COAXIAL2)
TV :
TV
DVR : DVD recorder
DVD : DVD player
CD :
CD player
AUTO :
Automatic identification of digital
and analog signals (HDMI takes
priority when the input signal is
digital.)
ANALOG :
Fixes the input signal to analog.
DIG :
Fixes the input signal to digital.
PCMFIX :
Fixes the input signal to PCM.
Factory setting:
TV, DVR ,DVD, CD ; AUTO
OFF :
When
you
wish
to
reduce
standby power consumption
ON :
When you activate the standby
through function (standby power
consumption becomes 0.7 W in
this setting)
Factory setting: ON
41
RQT8979
Advertisement
Table of Contents
