Remote Controlling Sound Effects; Adjusting Dolby Pro Logic 'S "Music " Mode; Adjusting Neo:6'S "Music " Mode; Adjusting Sfc (Sound Field Control) - Panasonic SC-ELS10 Operating Instructions Manual

Home theater audio system
Table of Contents

Advertisement

Remote controlling sound effects

See pages 30 and 31 for information about each mode.
RECEIVER
AV
SYSTEM
RECORDER
TV
DVD
TUNER
PLAYER
CD
VCR
BD/DVD
BAND
ANALOG 6CH
CH
VOLUME
0
DIRECT
TUNING
DISC
ENTER
XM CAT
XM CH
SKIP
SLOW/SEARCH
STOP
PAUSE
PLAY
DRIVE SELECT
CM SKIP
ENTER
SUB MENU
RETURN
XM DISPLAY
SUBWOOFER
TV
OFF
DIMMER
VOL
LEVEL EFFECT
NEO : 6
TV/VIDEO
SFC
AUTO
MUSIC
MOVIE
TEST
MUTING
Note
These
settings
remain
effective after the unit
goes off.
Adjusting Dolby Pro Logic
You can use the following modes when the input source is 2-channel stereo.
You can make up for differences in the output level of the front and surround speakers.
Press
(Dimension Control)
for adjustment.
Adjustment range: -3 (More surround sound) to +3 (More front sound)
Factory setting: 0
In this mode, you can play music more naturally by adjusting sounds assigned
to front and center speakers as a whole.
(Center Width Control)
Press
for adjustment.
Adjustment range: 0 (Center becomes clearer) to 7 (Center becomes wider)
Factory setting: 3
You feel like you are surrounded by music thanks to greater spread created by surround speakers.
Press
(Panorama)
Factory setting: OFF

Adjusting NEO:6's "MUSIC " mode

You can use the following modes when the input source is 2-channel stereo.
In this mode, you can play music more naturally by adjusting sounds assigned to
front and center speakers as a whole.
(Center Image
Press
Control)
for adjustment.
Adjustment range: 0 (Center becomes clearer) to 5 (Center becomes wider)
Factory setting: 2

Adjusting SFC (Sound Field Control)

Adjusting the
Press
output level
adjustment.
C (Center), RS (Surround right), SBR (Surround back right), SBL (Surround back left)
(SB when only one surround back speaker is connected), LS (Surround left):
("SBR ", "SBL " and "SB " are displayed when the surround back speakers are connected. )
Adjustment range; -20 dB to +10 dB
Factory setting; 0 dB
SUBW (Subwoofer):
Adjustment range; --- (off), MIN (minimum),
Factory setting; 20
• You cannot adjust the output levels of speakers other than the subwoofer in the
"PARTY " mode (á pages 30 and 31).
• You cannot adjust speakers not connected (á pages 13 and 23) and others set
as absent in "Setting speakers and their sizes" (á page 39).
Adjusting the
Press
effect level
Adjustment range: EFFECT 1 (minimum) to EFFECT 10 (maximum)
Factory setting: EFFECT 5
You cannot adjust the effect level in the "PARTY " mode (á pages 30 and 31).
's "MUSIC " mode
EFFECT
to select "DIMEN ", and press
EFFECT
to select "C-WIDTH ", and press
EFFECT
to select "PANORAMA ", and press
for selecting "ON " or "OFF ".
EFFECT
to select "C-IMAGE ", and press
LEVEL
to select a speaker, and press
Note
EFFECT
, and press
Note
1
to 29, MAX (maximum)
for adjustment.
for
33
RQT8979

Advertisement

Table of Contents
loading

This manual is also suitable for:

Saxr707 - home theater audio system

Table of Contents