Enjoying The Home Theater - Panasonic SC-ELS10 Operating Instructions Manual

Enjoying the Home Theater

POWER
INPUT SELECTOR
1
To turn the unit on
Press
To select "SPEAKERS A"
2
Press
To use bi-wire speakers (á page 22)
Press [SPEAKERS A] or [SPEAKERS B] to switch
"
A
B
To switch input sources
3
• Select the connected terminal when the names of the
terminal and equipment you wish to use for playback
do not match.
Turn
To use a DVD recorder with built-in VCR (á page 19)
• To play a DVD: select "DVR "
• To play a video cassette: select "VCR "
Play the selected input source.
4
To adjust the volume
5
Turn
To finish the Home Theater
Be sure to reduce the volume and press [8, POWER] to turn the unit to standby.
Digital signals this unit can play:
Dolby Digital (including Dolby Digital Surround EX), DTS (including DTS-ES and DTS 96/24) and PCM (á page 55)
Note
• The unit memorizes whether [SURROUND] has been pressed on or off for each input source.
• The setting always switches from off to on when the input comes from a surround source in Dolby Digital, DTS or other formats.
• When you press [SURROUND] off while playing a surround source (excluding a DVD-Audio source that does not allow down-mixing),
2-channel mix (2CH MIX) activates.
2-channel mix is canceled when you turn the unit off or when you switch input sources.
• The "SURROUND" indicator goes off when the sampling frequency for the input signal is higher than 96 kHz.
• The number of source channels appears on the display when a digital signal is input or input sources are switched. (Their number
may not appear depending on the selected source.)
28
RQT8979
"SURROUND"
" " "BI-AMP" "MULTI ROOM"
INPUT SELECTOR
BI-AMP SURROUND
ADVANCED DUAL AMP WIRELESS READY MULTI ROOM
POWER
SPEAKERS TUNE
-MENU/-SETUP ENTER SURROUND SPEAKERS
RETURN AUTO DETECTOR -MULTI ROOM
- -
MENU/ SETUP ENTER SURROUND SPEAKERS TUNE
RETURN -
AUTO DETECTOR MULTI ROOM
"ADVANCED DUAL AMP"
POWER
8
SPEAKERS
to switch " " on.
A A
" on.
INPUT SELECTOR
VOLUME
SPEAKERS
A B
VOLUME
AUTO SPEAKER SETUP HDMI
SETUP MIC
AUX
W
- -
S VIDEO VIDEO L AUDIO R SETUP MIC W
AUX
SURROUND
• The standby indicator "^" goes off when you turn the unit on.
Note
Do not forget to perform the auto speaker setup (á pages
26 and 27) when you play a source with the unit for the first
time.
SPEAKERS
A
SPEAKERS
BI-WIRE
A
B
(e.g.)
TUNER FM
AUX VCR
• When you select "DVR ", "DVD RECORDER " scrolls across
the display once.
• You can also select an input source using the remote control (
Subwoofer
Number of surround and surround back channels
Number of front and center channels
VOLUME
RECEIVER
AV
SYSTEM
TV
TUNER
CD VCR
BAND
To enjoy BI-AMP stereo sounds
See page 29.
TUNER AM TUNER XM
DVR BD/DVD TV/STB
To switch between 2-channel
stereo playback and surround
playback
Press [SURROUND].
Volume range:
– – dB (minimum),
–79dB to 0dB (maximum)
RECORDER
DVD
PLAYER
BD/DVD
ANALOG 6CH
CH
CD
page 6).
á