Table of Contents
Advertisement
Preset tuning
Presetting stations
n Auto presetting
1 Tune to the frequency where you want to
begin presetting. (á page 46)
Set the channel reception to FM 87.9 MHz or AM 530 kHz if you
want automatic presetting to start from the lowest frequency.
Preset channels that are automatically assigned by this unit
are:
FM: 1 to 30
AM: 21 to 30
Preset the FM stations first. If the AM stations are preset
before the FM stations, they will be erased when the FM
stations are preset.
MENU/
SETUP
-
-
2 Press
to enter the MENU.
RETURN
3 Select "TUNER " and confirm the setting.
4 Select "AUTO MEMO " and confirm the setting.
5 Select "START " and press [ENTER].
Select "CANCEL " to cancel.
• During automatic presetting, the memory indicator (
flashes and the frequency scrolls. The memory indicator
and channel number are displayed for a second when a
station is preset.
• The last station to be preset is displayed when presetting
finishes.
• Frequencies may not be preset correctly when broadcast waves are
too strong or too weak. In such cases, carry out presetting manually.
Listening to preset stations
(Using the remote control)
n Select the channel.
Press
CH
n Press the numbered buttons to select the channel.
Press
0
ENTER
Reducing excessive noise (on the unit)
Select if noise is excessive during radio reception.
Press [-MENU/–SETUP, RETURN] to enter the MENU.
n During FM stereo reception
You can improve FM reception by switching reception to
monaural.
1 Select "TUNER " and confirm the setting.
2 Select "FM MODE " and confirm the setting.
3 Select "MONO " and confirm the setting.
• When this is set, "MONO" appears on the display.
• Select "AUTO " to cancel.
4 Press [-MENU/–SETUP, RETURN] twice to
select "EXIT " and press [ENTER].
• Hold down the button to change
channels faster.
To select a two digit number
e.g. 21: [ ≧10, ENTER] → [2] → [1]
n Manual presetting
1 Tune to the station you want to preset.
(á page 46)
MENU/
SETUP
-
-
2 Press
to enter the MENU.
RETURN
3 Select "TUNER " and confirm the setting.
4 Select "MEMORY " and confirm the setting.
5 Select a channel number and press [ENTER].
"STORED " is displayed.
• To continue presetting, press [TUNE 2 or 1] to tune
another station from step 1.
6 Press [-MENU/–SETUP, RETURN] twice to
select "EXIT " and press [ENTER].
• FM stations can also be preset in the MONO mode
(á below).
)
M
(Using the unit)
MENU/
SETUP
-
-
1 Press
to enter the MENU.
RETURN
2 Select "TUNER " and confirm the setting.
3 Select "TUNE MODE " and confirm the setting.
4 Select "PRESET " and confirm the setting.
5 Press [-MENU/–SETUP, RETURN] twice to
select "EXIT " and press [ENTER].
TUNE
6 Press
• Hold down the button to change channels faster.
• Select "MANUAL " in step 4 when you wish to perform manual
tuning (á page 46).
n During AM reception
When there is a lot of noise interference with an AM broadcast,
try switching to this mode.
1 Select "TUNER " and confirm the setting.
2 Select "BEAT PROOF " and confirm the setting.
3 Select "MODE 1 " or "MODE 2 " and confirm
the setting.
4 Press [-MENU/–SETUP, RETURN] twice to
select "EXIT " and press [ENTER].
to select the channel.
47
RQT8979
Advertisement
Table of Contents
