Table of Contents
Advertisement
The radio cannot be tuned in
or there is a lot of noise and
interference.
There is a lot of noise when listening to AM.
When using an HDMI
connection, the first few
seconds of sound is cut off.
"U70-1-1 " appears on the
display.
"U70-1-2 " appears on the
display.
"U70- 3 " appears on the
display.
The unit does not work
properly.
EZ Sync "HDAVI Control"
does not function properly.
The equipment connected to
the unit's "HDMI (BD/DVD
PLAYER) IN" terminal turns on
and off by itself.
The remote control doesn't work.
Other products respond to the
remote control.
Help message
Message
1
2
3
4
5
• Connect the appropriate antenna. (You may need an outdoor antenna or one with
more elements.)
• Adjust the position of the FM or AM antenna.
• Reduce the treble.
• Turn off nearby televisions, video decks, DVD recorders, DVD players, and satellite
receivers.
• Separate the antenna from other cables, cords, and appliances.
• Try changing the BEAT PROOF mode.
• Should you be playing a chapter on a DVD:
- Change the audio output setting on the DVD player or DVD recorder from
"Bitstream" to "PCM".
(6.1-channel sources will however be played as 5.1-channel.)
- Select "PCMFIX " as instructed in "Setting input signals" when you play 2-
channel stereo sources.
• The equipment connected by the HDMI cable is not compatible with the unit's copyright
protection technology.
• The unit has received a signal for a picture format that is incompatible with the
HDMI connection. Check the settings of the connected equipment.
• Should anything unusual happen using an HDMI connection:
Consult your dealer if the sign remains on the display after these steps.
- Turn the connected equipment off and on again.
- Pull out the HDMI cable then reinsert it.
- Reduce the number of equipment connected in series to the HDMI terminal if
exceeding 2 units.
• The unit does not work properly when wrong cords are in HDMI input and output terminals.
Turn the unit off, unplug the AC power supply cord, and make connections again.
• Connect the unit to your TV (VIERA) using the HDMI cable, switch the TV on, unplug
the unit's AC power supply cord, and insert it into a household AC outlet again.
• Some of the linked operations apply to the connected equipment that is EZ Sync
"HDAVI Control" compatible. To prevent this, set the connected equipment (DVD
recorder (DIGA) and others) against EZ Sync "HDAVI Control".
• Replace the batteries if they are worn.
• Change this unit's remote control code to "REMOTE 2 ".
Cause/countermeasure
Muting is on.
Press [MUTING] on the remote
control to cancel the function
(á page 35).
The selected mode is not "MUSIC ".
Change the mode to "MUSIC "
(á pages 30 and 31).
Center and surround speakers are
not connected, or they are set as
absent. Connect the speakers
(á page 13) or change their
setting to present (á page 39).
Surround
and
surround
speakers are not connected, or
they are set as absent. Connect
the speakers (á pages 13 and 23)
or change their setting to present
(á page 39).
Surround back speakers are not
connected, or they are set as
absent. Connect the speakers
(á page 23) or change their setting
to present (á page 39).
Message
6
7
8
9
back
10
(flashing)
11
12
Pages
25
25
37
47
41
15, 32
15, 32
45
Cause/countermeasure
You are trying to use the effect
unavailable for DTS-ES sources.
You are trying to use the effect
unavailable for DVD-Audio sources.
You are trying to use the effect
unavailable for DVD analog
6-channel playback.
You are trying to use the effect
unavailable for the current input
source.
The unit is in the "PCMFIX " mode.
Cancel this mode (á page 41).
"SPEAKERS A" is off. Select
"SPEAKERS A" (á page 28).
"SPEAKERS A" and "SPEAKERS
B" are off. Select "SPEAKERS A"
or "SPEAKERS B" (á pages 28
and 29).
–
–
–
–
–
–
–
–
–
6
53
RQT8979
Advertisement
Table of Contents
