Remote Controlling A Tv Or Dvd Recorder Etc; Remote Controlling A Tv; Remote Controlling A Dvd Recorder - Panasonic SC-ELS10 Operating Instructions Manual

Remote controlling a TV or DVD recorder etc.

Besides this unit, you can operate a Panasonic TV, DVD recorder, DVD player, VCR or CD player (excluding certain models) using the
supplied remote control. See respective equipment's operating instructions for detailed operations.
You may need to enter a code to operate some equipment (
Aim the remote control at the
equipment you wish to operate.
RECEIVER
AV
SYSTEM
RECORDER
TV DVD
TUNER PLAYER
CD VCR BD/DVD
BAND ANALOG 6CH
CH
VOLUME
0
DIRECT
TUNING
DISC ENTER
XM CAT XM CH
SKIP SLOW/SEARCH
STOP PAUSE PLAY
DRIVE SELECT CM SKIP
ENTER
SUB MENU RETURN
XM DISPLAY
SUBWOOFER
OFF DIMMER
VOL
LEVEL EFFECT
NEO : 6 TV/VIDEO
SFC AUTO

Remote controlling a TV

To switch the unit's
input to "TV/STB "/
To switch the remote
Do not forget to
control to the TV
press this before
operation mode
operating a TV.
To turn the TV on or
off
To switch the TV's
input mode (TV/video)
To adjust the TV
volume
To select a channel
(When you make a
selection in rising or falling
order)
To select a channel
(When you select a
channel directly)

Remote controlling a DVD recorder

To switch the unit's
input to "DVR "/
To switch the remote
control to the DVD
recorder operation
mode
To turn the DVD
recorder on or off
To start playback
To skip a track or
chapter
To search through the
disc
To play in
slow-motion
TV
To show the direct
navigator
(or the top menu)
To show a sub menu
TV
To show the
FUNCTIONS window
(while stopped)
AV
SYSTEM
To return to the
previous screen
TV/VIDEO
To select an item
Press to select after pressing
TV
[DIRECT NAVIGATOR, TOP
MENU], [S, SUB MENU], or
[FUNCTIONS].
VOL
When operating a Panasonic DVD recorder
using the supplied remote control
Change the control setting on the supplied
remote control
CH
recorder's remote control mode.
control mode in its operating instructions.
1 Press [DVD RECORDER].
2 Press and hold [ENTER] together with
[1], [2], or [3] for 2 seconds or longer.
• [Mode 1], [Mode 2], or [Mode 3] is set on
0
the remote control according to the
ENTER
pressed button.
• The factory setting is [Mode 1].
page 45).
á
RECORDER
DVD
Do not forget to
press this before
operating a DVD
recorder.
AV
SYSTEM
PLAY
SKIP
SLOW/SEARCH
PAUSE
SLOW/SEARCH
SUB MENU
RETURN
to match the DVD
Confirm the DVD recorder's remote
To confirm the
selected item
To select a track or
chapter directly
• Some of the models
require you to press
[ENTER] to confirm after
pressing number buttons.
To pause
To move forward or
backward frame by
frame
To skip a minute
forward
To switch DVD
recorder drives (HDD,
DVD drive, and SD
drive etc.)
To select a channel
(When you make a
selection in rising or falling
order)
To select a channel
(When you select a
channel directly)
To stop playback
When DVD recorder drives do not switch
The condition may mean the DVD recorder does not
recognize the signal this unit's remote control transmits.
Switch the drives again after changing the
signal in the following procedure.
1 Press [DVD RECORDER].
2 Press and hold [ENTER] together
with [8] for 2 seconds or longer.
• To return: In step 2 above, press and hold
[ENTER] together with [9] for 2 seconds
or longer.
Note
When you operate a DVD recorder with
built-in VCR, press [DRIVE SELECT] to
select a choice other than VCR.
ENTER
0
ENTER
PAUSE
PAUSE
CM SKIP
DRIVE SELECT
CH
0
ENTER
STOP
43
RQT8979