Table of Contents
Advertisement
Control with HDMI (EZ Sync
What is EZ Sync "HDAVI Control"?
EZ Sync "HDAVI Control" is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or DVD
recorder (DIGA) under "HDAVI Control". You can use this function by connecting the equipment with the HDMI cable. See the
operating instructions for connected equipment for operational details.
• EZ Sync "HDAVI Control", based on the control functions provided by HDMI which is an industry standard known as HDMI CEC
(Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other
manufacturers' equipment that supports HDMI CEC cannot be guaranteed.
1 Connect the unit to a Panasonic TV (VIERA) and DVD
recorder (DIGA) under EZ Sync "HDAVI Control" using
the HDMI cable.
(It is recommended that you use Panasonic's HDMI cable. Non-
HDMI-compliant cables cannot be utilized.)
2 Make settings in the menu for the TV (VIERA) to activate
linked EZ Sync "HDAVI Control" operations.
3 Perform the following steps to make sure the unit
accurately identifies connected equipment.
1) Turn all equipment on.
2) Switch the TV (VIERA) off and then put it back on.
3) Switch the unit's input to "DVR " and make sure the TV
(VIERA) correctly shows pictures.
(Take these steps after changing connections or settings.)
.
0
DIRECT
TUNING
DISC
ENTER
XM CAT
XM CH
SKIP
SLOW/SEARCH
STOP
PAUSE
PLAY
DRIVE SELECT
ENTER
Note
• Only this unit turns off when you shut it down. Other connected equipment compatible with EZ Sync "HDAVI Control" stay on.
• Audio output automatically switches to speakers on your TV (VIERA) when you turn the unit off.
Audio output from the DVD recorder (DIGA) switches from speakers on the TV (VIERA) to speakers connected to the unit when you
turn the unit on.
• This unit goes from off to on, and speakers connected to this unit start making audio output when you set the TV (VIERA) to output
sounds from the unit.
• This unit automatically goes off when you switch your TV (VIERA) off. (This operation is unavailable when you set the input source as
"TUNER " or "CD " on this unit.)
• The input for the unit switches automatically to "DVR " when a source is played back on the DVD recorder.
• When pictures arrive after sounds, select "ON " in "Adjusting audio timing to video timing" (á page 42).
• To set the unit against EZ Sync "HDAVI Control", see page 42.
Enjoying sounds from the TV
The input source for the unit switches to "TV/STB " when you select a TV channel or operate the TV in other ways (á page 43).
32
RQT8979
Enjoying the Home Theater through one-touch operations
CH
Aim the remote control at the DVD recorder (DIGA) and press
VOLUME
The following operations are automatically performed when you just press [ONE TOUCH PLAY].
1 The DVD recorder goes on and starts playing back the recorded media in the selected drive (e.g.
HDD, DVD).
2 The TV goes on and the TV input changes.
3 Playback starts after the unit is turned on and the input source for the unit switches to "DVR ".
CM SKIP
To adjust the volume: Press
You can also adjust the volume on your TV (VIERA)'s remote control.
(A message informing the action appears on your TV while you adjust the volume.)
• Press [u SKIP] to start playing a DVD disc or a recorded TV program again when playback does
not start from the beginning.
"HDAVI Control
™
DIGITAL
AUDIO OUT
(OPTICAL)
GND
GND
GND
LOOP
LOOP
LOOP
EXT
LOOP ANT
GND
FM ANT
AM ANT
DIGITAL IN
(BD/
(TV/STB)
(DVD RECORDER)
DVD PLAYER)
(CD)
OPTICAL1 OPTICAL2 COAXIAL1 COAXIAL2
DVD recorder
(DIGA)
You need an optical fiber cable for enjoying TV with
surround sound.
VOLUME
"
)
™
HDMI
(AV IN)
TV (VIERA)
Rear panel
OUT
(BD/DVD PLAYER) IN
(DVD RECORDER) IN
S VIDEO
VIDEO
OUT
BD/
IN
IN
IN
OUT
BD/
IN
IN
TV MONITOR
DVD PLAYER
DVD RECORDER
TV/STB
TV MONITOR
DVD PLAYER
DVD RECORDER
CENTER
HDMI
(AV OUT)
IN
VCR
Advertisement
Table of Contents
