Installation You must install and STOP! See page 3 charge the battery before for easy instructions. using the telephone. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall.
Telephone base and charger installation Install the telephone base and charger as shown below. The telephone base is ready for tabletop use. Telephone base installation • Plug one end of the telephone line cord into the telephone jack on the back of the telephone base.
Battery installation and charging Once you have installed the battery, the screen indicates the battery status. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 0 hours of continuous charging.
Quick reference guide - handset pDIR/VOLUME Press pDIR to show CHARGE indicator directory entries. On when the handset is Press to scroll up while charging in the telephone base in menus. or charger. While entering names or numbers, press to move the qCID/VOLUME cursor to the right.
Quick reference guide - handset Main menu Main menu The > symbol highlights Play messages a menu item. Answering sys >Play messages Directory Answering sys Caller ID log Intercom Ringers Set date/time Settings Using menus: Website • Press MENU/ to show the menu. SELECT Press q or p...
Telephone settings Caller ID announce By default, the caller ID announce feature is programmed On. To turn on/off the caller ID announce on your handset or base: . Press MENU/ in idle mode to enter the main menu. SELECT LCD language .
Answering system operation Turn the answering system on or off You must turn on the answering system to answer and record messages. When it is turned on, the /ANSWER ON light on the telephone base turns on and ANS ON displays on the handset.