Ptt Call To Multiple Devices - AT&T CL82229 Complete User's Manual

Multiple handset use
Push-to-talk (PTT)

PTT call to multiple devices

When there are multiple handsets registered to the phone system,
PTT supports one-to-group calls. PTT supports a maximum of
one-to-four calls when one to five handsets are registered, and
a maximum of one-to-three calls when six or more handsets are
registered. The first four registered handsets will be able to use this
feature. Other handsets can only use PTT for one-to-one calls.
To call multiple devices:
1. You have three ways to call multiple devices. When the handset is
not in use:
Press and hold
f
Connecting to group....
Press PTT. Press q
f
/SELECT or press
MENU
Connecting to group....
Press PTT. Press TONE followed by # (pound key). The
f
handset shows Connecting to group....
When the connection is made, both the caller and the destination
parties hear a beep. The speakerphones on all other devices
automatically activate.
2. You need to press and hold PTT when you want to speak. Speak
towards the handset. Your voice is broadcast to all devices.
3. Release PTT after speaking.
4. Any extension can reply (see Answer a PTT call on page 49).
Note: After PTT on the handset is released, the PTT call remains open for a short time. If no
one presses PTT on the handset within ten seconds, the PTT call ends automatically.
PTT
until the handset shows
or p
CID DIR
PTT
and your handset shows
48
to choose Group. Press