Table of Contents
Advertisement
Multiple handset use
Push-to-talk (PTT)
You can directly broadcast messages to the
speakerphone of any device. Press and hold
PTT on a handset to begin
two-way communication.
Only one device can talk at a time. To do
f
so, press and hold PTT.
You must release PTT, so the other person
f
can respond.
Only one PTT session can be active at a time.
f
While PTT is in use between two devices, other devices cannot
f
use the intercom feature but can access the answering system.
When you attempt to place a PTT call to another device which is
f
accessing the answering system or on an intercom call or outside
call, your device screen shows Not available at this time.
Note: The PTT function is not available when QUIET mode is on or if you have only one
handset.
Turn PTT on or off
1. Press
PTT
menu displays.
2. Press q
CID
/SELECT.
MENU
3. Press q
CID
press
MENU
Note: The handset screen displays No Incoming PTT when PTT is turned
off.
when the handset is not in use. The PUSH TO TALK
to highlight PTT On/Off, then press
or p
DIR
or p
to choose On or Off, then
DIR
/SELECT.
46
PUSH TO TALK
>PTT On/Off
Advertisement
Table of Contents
