Table of Contents
Advertisement
Answering system
Answering system settings
To record a new outgoing announcement:
1. When the handset is in idle mode, press MENU/
the main menu.
2. Press qCID or pDIR to scroll to Answering sys, then press
/SELECT.
MENU
3. Press
MENU
Announcement.
4. Press
MENU
system announces, "Record after the tone. Press 5
when you are done."
5. Speak towards the handset to record your announcement. Press
5 to end recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll to Play annc
and press
MENU
To reset your outgoing announcement:
1. When the handset is in idle mode, press MENU/
the main menu.
2. Press qCID or pDIR to scroll to Answering sys, then press
/SELECT.
MENU
3. Press MENU/SELECT again to select Announcement.
4. Press qCID or pDIR to scroll to Reset annc, then press
/SELECT. The screen shows Reset to default annc?.
MENU
Press
MENU
Annc. reset to default before returning to the previous menu.
-OR-
Press qCID or pDIR to scroll to Play annc, then press
/SELECT. While the announcement is playing, press
MENU
/DELETE to delete the announcement. The screen shows
MUTE
Annc. Deleted before returning to the previous menu.
When your announcement is deleted, the system answers calls with
the default announcement described on page 104. You cannot
delete the default announcement.
/SELECT again to select
/SELECT to select Record annc. The
/SELECT.
/SELECT again to confirm. The screen shows
105
to enter
SELECT
>Record annc
Play annc
to enter
SELECT
Advertisement
Table of Contents
