Right Angled Adjustment Of X Rail - Roland EGX-600 Service Notes

4-6 RIGHT ANGLED ADJUSTMENT OF X-RAIL (Referential Time : 5min.)
Remove the Front Cover.
1
Loosen the Set Screws of the Y Drive Pulley.
2
Move the X-Rail to the Rear side frame.
3
Tighten the Set Screws by pushing the X Rail to rear side
4
frame.
Make sure that the Y Drive Pulley won't idle.
Front Cover
Y Drive Pulley
Set Screws
Y Drive Pulley
Set Screws
4 Adjustment
4
79