Table of Contents
Advertisement
3-7 X Belt_Repalcement (Referential Time : 30minutes)
Remove the X Axis Rail Cover, Rail Cover and Right
1
Side Cover.
Move the Carriage to the Right side by hands.
2
Remove the Junction Board Cover.
3
Remove the screws as the figure and after that, shift the
4
Junction Board Base behind from the Carriage.
Be careful the Limit SW. It is possible to break it
when you shift the Junction Board Base.
X Axis Rail Cover
Spindle Cover
Carriage
Junction Board
Cover
Screws
3 Replacement of Main Parts
Right Side Cover
3
Rail Cover
Junction
Board
Base
59
Advertisement
Table of Contents
