Table of Contents
Advertisement
3-2 X Axis Motor_Replacement (Referential Time : 20 minutes)
Remove the X Axis Rail Cover, Rail Cover and Right
1
Side Cover.
Move the Head Carriage to the left end.
2
Remove the X Motor Cable from the XY Junction
Board.
Remove the Spring and after that remove the screws fixing
3
the Flange.
There are the collars on the lower left and upper
right side of the screws. Be careful not to lose
them.
Remove the X Motor together with the Flange from the Drive
4
Belt.
X Axis Rail Cover
Rail Cover
Drive Belt
Screws with the collar
Drive Belt
3 Replacement of Main Parts
Right Side Cover
XY Junction Board
X Motor
Cable
Spring
Flange
Screws
X Motor
37
3
Advertisement
Table of Contents
