Y Axis Motor_Replacement - Roland EGX-600 Service Notes

3-3 Y Axis Motor _Repalcement (Referential Time : 20 minutes)
Remove the Front Cover.
1
Disconnect the Y Motor Cable.
2
Remove the Spring and the screws fixing the Flange.
3
Then, remove the Y Motor together with the Flange from the
Drive Belt.
There is the collar on the lower right side of the
flange. Be careful not to lose it.
When it is difficult to remove the lower right
screw, you can remove it from the base of the
machine.
Front Cover
Y Motor Cable
Drive
Belt
Screws
Spring
Screw with the collar
Flange
Y Motor
3 Replacement of Main Parts
3
41