Table of Contents
Advertisement
7-3 Specification
Table type
Table size
Cutting area
Loadable workpiece thick-
ness
XYZ-axis motor
Feed rate
Acceleration
Software resolution
Mechanical resolution
Spindle motor
Spindle speed
Tool chuck
Positioning Accuracy
Repeatability
Display
Buttons and Controls
Menu button, ENTER/PAUSE button, Spindle button, X/Y-axis Origin Set button, Z-axis Origin Set button,
Movement buttons, Z-axis Movement buttons, Feed button, Copy button, and dial
Interface
Parallel connector (Centronics-compliant), serial connector (RS-232C-compliant), Memory card slot (Com-
pliance with Multi Media Card), expansion connector 1, expansion connector 2
Buffer memory
Instruction system
Power supply
Power consumption
Acoustic noise level
Dimensions (main unit)
Weight (main unit)
Packed dimensions
Packed weight
Operating environment
Accessories
Operation panel: 1, Operation-panel connector cable: 1, Power cord: 1, Depth regulator nose unit: 1,
Solid collet : 1, Clamps : 4, Wrench (17 mm: 1, 10 mm: 1), Hexagonal screw driver (2 mm): 1, Hexagonal
wrench (3 mm): 1, Roland Software Package CD-ROM : 1, User's Manual: 1
EGX-600
610 (W) x 407 (D) mm (24 (W) x 16 (D) in.)
610 (X) x 407 (Y) x 42.5 (Z) mm
(24 (X) x 16 (Y) x 1-5/8 (Z) in.)
AC servo motors (DAC-FFP), 3-axis simultaneous control
XY-axis: 0.5, 1 to 100 mm/s (0.02 in./s, 0.039 to 3.9 in./s)
Z-axis: 0.5, 1 to 50 mm/s (0.02 in./s, 0.039 to 1.9 in./s)
XY-axis: 0.003 mm/step (0.00012 in./step)
Z-axis: 0.0025 mm/step (0.000098 in./step)
± 0.1 % of distance traveled or ± 0.1 mm (± 0.004 in.), whichever is greater (no-load operation)
AC 117 V, 230 V, 240 V ± 10 %, 50/60 Hz
3.5 A at 117 V, 1.6 A at 230 V, 1.6 A at 240 V
No-load operation: 75 dB (A) or less
995 (W) x 820 (D) x 521 (H) mm
(39-3/16 (W) x 32-5/16 (D) x 20-1/2 (H) in.)
64 kg (141 lb.)
1370 (W) x 1130 (D) x 835 (H) mm
(54 (W) x 44-1/2 (D) x 33 (H) in.)
110 kg (243 lb.)
Temperature: 5 to 40ûC (41 to 104ûF)
T slot
407 (W) x 305 (D) mm (16 (W) x 12 (D) in.)
407 (X) x 305 (Y) x 42.5 (Z) mm
(16 (X) x 12 (Y) x 1-5/8 (Z) in.)
Maximum 40 mm (1-9/16 in.)
0.1 G, 0.05 G
0.01 mm/step (0.00039 in./step)
DC brushless motor, Maximum 72 W
8,000 to 30,000 rpm
Cutter holder (4.36 mm) and collet
0.05 mm (0.002 in.) or less
LCD panel with backlight
2MB (replot buffer: 1.9MB)
RML-1 (mode 1, mode 2)
standby: 45 dB (A) or less (According to ISO 7779)
795 (W) x 719 (D) x 521 (H) mm
(31-5/16 (W) x 28-5/16 (D) x 20-1/2 (H) in.)
51 kg (112 lb.)
1160 (W) x 1010 (D) x 855 (H) mm
(45-3/4 (W) x 40 (D) x 33-3/4 (H) in.)
86 kg (190 lb.)
humidity: 35 to 80 % (no condensation)
7 Service Activities
EGX-400
99
7
Advertisement
Table of Contents
