Adjusting The Angle- And Depth-Adjustable Foot; Plate; Adm Legrests; Swivelling The Footrest/Legrest Outward And/Or - Invacare TDX SP2 Series User Manual

Hide thumbs Also See for TDX SP2 Series:
Table of Contents

Advertisement

Invacare® TDX® SP2 Series
1. Use the Allen key to loosen both set screws on the foot

plate.

2. Adjust to the desired angle.
3. Re-tighten the screws.
5.14.9 Adjusting the angle– and depth–adjustable foot
plate
5 mm Allen key
1. Use the Allen key to loosen the set screw on the foot
plate (1).
2. Adjust the foot plate to the desired angle or depth.
3. Re-tighten the screw.
62

5.15 ADM legrests

5.15.1 Swivelling the footrest/legrest outward and/or

removing

The small unlocking button is located on the upper section of
the footrest/legrest. When the footrest/legrest is unlocked,
it can be swivelled inward or outward when getting into the
wheelchair as well as being removed completely.
1. Press the unlocking button (1) and swivel the
footrest/legrest outward.
2. Remove the footrest/legrest in an upward direction.

5.15.2 Setting the angle

CAUTION!
Risk of crushing
– Do not reach inside the swivelling range of the
legrest.
1578997-N

Advertisement

Table of Contents
loading

Table of Contents