Setup; General Setup Information - Invacare TDX SP2 Series User Manual

Hide thumbs Also See for TDX SP2 Series:
Table of Contents

Advertisement

Invacare® TDX® SP2 Series

5 Setup

5.1 General Setup Information

WARNING!
Risk of Death, Serious Injury or Damage
Continued use of the mobility device that is not
set to the correct specifications may cause erratic
behaviour of the mobility device resulting in
death, serious injury, or damage.
– Performance adjustments should only be made
by professionals of the healthcare field or
persons fully conversant with this process and
the driver's capabilities.
– After the mobility device has been
set-up/adjusted, check to make sure that the
mobility device performs to the specifications
entered during the set-up procedure. If
the mobility device does not perform to
specifications, IMMEDIATELY turn the mobility
device Off and re-enter set-up specifications.
Contact Invacare, if mobility device still does
not perform to correct specifications.
WARNING!
Risk of Death, Serious Injury or Damage
Attaching hardware that is loosely secured or
missing could cause instability resulting in death,
serious personal injury, or property damage.
– After ANY adjustments, repair or service
and before use, make sure that all attaching
hardware is present and tightened securely.
30
WARNING!
Risk of Injury or Damage
Incorrect set up of this mobility device performed
by users/caregivers or unqualified technicians can
result in injury or damage.
– DO NOT attempt to set up this mobility device.
Initial set up of this mobility device MUST be
performed by a qualified technician.
– Adjustment by the user is only recommended
after they have been given appropriate
guidance by the healthcare professional.
– DO NOT attempt to carry out the work if you
do not have the listed tools available.
CAUTION!
Risk of Injury or Damage
The mobility device is fitted with an individual,
multiply adjustable seating system including
adjustable legrests, armrests, a headrest or other
options which are used to adapt the seat to the
physical requirements and the condition of the
user. It is possible that collisions or pinch points
can occur between mobility device components
due to various combinations of adjustment
options and their individual settings.
When adapting the seating system and the seat
functions to the user:
– Beware of pinch points when adjusting the
mobility device components and
– ensure that no mobility device components
collide.
1578997-N

Advertisement

Table of Contents
loading

Table of Contents