Changing The Paper Settings In Eppserver - Epson Gemini User Manual

Changing the Paper Settings in EPPServer

1. Before changing the paper, it's a good idea to disable the printer on which
2. Click the
Click the checkbox
to disable the
printer here
6-2 Maintaining the System
When you change the size and/or type of paper in a tray, you need to run
the Change Paper utility and set the paper size and media type levers to
match the paper you're using, as described in the next section.
For instructions on handling and storing paper, see Chapter 4.
When you want to change the type and/or size of paper in a paper tray,
you need to run the Change Paper utility in EPPServer on the Gemini.
If you are switching from Matte paper to Luster paper, you need to
clean the paper path with a cleaning sheet before loading the new
paper type. You also need to clean the paper path after every 50
sheets of Matte paper you print. See page 6-10 for instructions.
you're going to change paper.
At the bottom left of the EPPServer screen, click the appropriate checkbox
in the Enable/Status column to disable the printer. Any job currently
printing will finish before the printer is disabled.
To select options on the EPPServer screen, you use the touchpad
attached to the top of the Gemini. For instructions on using the
touchpad, see page 6-19.
Change Paper
button on the EPPServer screen.
Click
Change Paper