Controlling Print Jobs; Checking Print Job Status; Starting Eppmonitor - Epson Gemini User Manual

3

Controlling Print Jobs

Checking Print Job Status

Starting EPPMonitor

A-3-1
After you send your print jobs from EPPLayout to the server, you can
check on them and control their progress right from your workstation.
You can also check on the status of the printers and the amount of paper
and ink left in them. Follow the steps in these sections:
• "Checking Print Job Status" below
• "Changing Print Job Priorities and Other Settings" on page 3-7
• "Deleting Print Jobs" on page 3-9
• "Reprinting Print Jobs" on page 3-10
• "Checking the Printer Status" on page 3-11
• "Checking Print Job Status with EPPServer" on page 3-14
After sending a print job to the server, you can check on its status using
EPPMonitor. You can also check the entire queue of waiting print jobs,
see information about jobs that have already been printed, delete and
reprint jobs, and change print job settings and priorities as necessary.
To view the current status of the ink and paper in the printers, see
page 3-11.
You run EPPMonitor from your browser. You should have a version of
®
Microsoft Internet Explorer 5.0 or later for the best results, but you can
®
also use Netscape Navigator 4.7 or later.
Make sure these browser settings are selected:
• Cache—set to Automatically (IE), Every visit to the page (IE), or
Once per Session (Netscape)
• Show friendly HTTP error messages—turn off (uncheck)
• CGI form submission, Java, and JavaScript—enable these, but turn
off the alert dialog
• Alerts—turn off the alert for non-secure documents
• Cookies—set to accept all cookies
Controlling Print Jobs 3-1