Setting The Paper Tray Levers - Epson Gemini User Manual

11. Push in the paper tray until it meets resistance. The
out.
12. Set the paper size and media type levers for the paper you're using. See the
next section.
If you switched from Matte paper to Luster paper, you need to clean
the paper path with a cleaning sheet before printing on the new
paper type. You also need to clean the paper path after every 50
sheets of Matte paper you print. See page 6-10 for instructions.

Setting the Paper Tray Levers

Set the paper type and paper size levers to indicate the paper you loaded.
Paper type lever settings
Enhanced Matte Paper
Premium Luster Photo Paper
Paper size lever settings
13 × 19 inches
8.3 × 11.7 inches
Paper type
Paper size
Paper Out
Paper type lever
Paper size lever
Paper type lever setting
Enhanced Matte Paper (EM)
Premium Luster Photo Paper (PL)
Paper size lever setting
×
13" 19"
×
8.3" 11.7"
Maintaining the System
light goes
6-9