Using The Gemini Printers - Epson Gemini User Manual

• Turn off the Gemini (using only the switch on the back), wait at least 5
minutes for it to shut down completely, and unplug it before cleaning.
Clean with a damp cloth only. Do not spill liquid on the Gemini.
• Unplug the Gemini and refer servicing to qualified service personnel (as
described on page 7-13) under the following conditions:
If the power cord or plug is damaged; if liquid has entered the Gemini;
if the equipment has been dropped or the cabinet damaged; if the
Gemini cabinet or any Gemini component has been damaged; if the
Gemini does not operate normally or exhibits a distinct change in
performance. Adjust only those controls that are covered by the
operating instructions.

Using the Gemini Printers

• Do not put your hand inside the printer or touch the print head during
printing. Do not move the print head by hand.
• Under normal circumstances, ink will not leak out of the cartridges. If it
does get on your skin, wash it off with soap and water. If it gets in your
eyes, flush them immediately with water.
• Keep ink cartridges out of the reach of children and do not drink the
ink.
• Do not dismantle the ink cartridges or try to refill them. This could
result in damage to the print head.
• Once you install an ink cartridge, do not remove the cartridge except to
replace it with a new one (or transport the printer).
• Install the ink cartridge immediately after you remove it from its
package. Leaving the cartridge unpacked for a long time before use may
result in reduced print quality.
• Do not use an ink cartridge beyond the date printed on the cartridge
carton. For best results, use up the ink cartridges within six months of
installing them.
• Always turn the printer off using the
button is pressed, the
not turn off the Gemini until the
P
Operate
P
light flashes briefly then goes out. Do
Operate
P
Operate
button. When this
light is off.
Notices 8-3