Starting Epplayout - Epson Gemini User Manual

• "Creating a Layout in Free Layout Mode" on page 2-9
• "Dragging and Dropping Photos Into Your Layout" on page 2-11
• "Adding Pages to Your Layout" on page 2-14
• "Trimming and Rotating Photos" on page 2-15
• "Adding Information and/or Crop Marks to Your Layout" on page 2-16
• "Selecting Printing Options" on page 2-19
Don't modify or delete any of the EPPLayout program files on your
workstation, or the program won't work properly.

Starting EPPLayout

1. Double-click the
network Logon screen:
2. Select your operator name, type in your password (if you have one), and
click .
OK
If you want to set up a Studiomaster password, see page A-1 for
instructions.
If you see a message telling you EPPLayout is unable to connect to
the server, make sure Gemini is turned on (as described beginning on
page 2-1) and the EPPServer display appears on the Gemini screen. If
you still see an error message, check the information on page 7-7 for
possible solutions.
If you see the Preferences dialog box when you first log on, enter
your server IP address and workstation computer name, then click
OK. This information was noted on the System Information sheet
(located behind the Supplements tab in your User Kit binder) when
the Gemini was installed.
icon on your desktop. You see the
EPPLayout
Laying Out and Printing Photos
Select your
operator
name. . .
type in a
password,
if you have
one . . .
then click
OK
2-3