Laying Out Your Photos - Epson Gemini User Manual

2. Turn on your workstation. Follow the steps in the next section to run

Laying Out Your Photos

2-2 Laying Out and Printing Photos
You see the EPPServer screen on the Gemini monitor:
EPPLayout on your workstation.
When you're ready to turn off the Gemini system, exit EPPLayout or
other Gemini software on your workstation, wait until all printing has
finished, then press the bottom of the switch on the back of the
Gemini case. It takes up to 5 minutes for the system to shut down
completely, so don't turn it on again right away.
Before you lay out your photos for printing, make sure you've prepared
your digital image files on the workstation as described in Chapter 1.
You may also want to check on the current amount of paper and ink
in the printers before you begin. See "Checking the Printer Status"
on page 3-11 for instructions.
Follow the steps in these sections to lay out your photos for printing:
• "Starting EPPLayout" on page 2-3
• "Selecting Printer and Paper Options" on page 2-5
• "Selecting Template or Free Layout Mode" on page 2-6
• "Selecting a Template or Package in Template Mode" on page 2-7