Table of Contents
Advertisement
Select one pattern each for rows 1, 2, and 3. Then enter the number of the
best pattern for each row in the corresponding boxes on the screen.
You may want to check the alignment patterns using a standard 8×
loupe so they're easier to see. You may need to align more than once
for optimum results.
8. If the pattern numbered 8 in each row is the best aligned, click
If not, click
numbered 8 in each row is the best aligned. If not, repeat steps 6 and 7.
9. When you're finished, click
Setting Up Receipt of Error Message E-mails
You can receive a notification by e-mail if an error occurs on the Gemini
system. This informs you of any Gemini errors while it is operating
unattended and you're at a remote location. You can even receive these
e-mails on a web-based, two-way pager or cell phone.
Follow the steps in this section to set up receipt of error message e-mails.
1. On the Gemini EPPServer screen, click the
lower right corner.
To select options on the EPPServer screen, you use the touchpad
attached to the top of the Gemini. For instructions on using the
touchpad, see page 6-19.
You see the Server Settings screen:
to print another test page. Make sure the pattern
Realignment
Finish
.
Server Settings
Click the E-Mail
Settings tab
Maintaining the System
.
Finish
button in the
6-17
Advertisement
Table of Contents
