Deleting Print Jobs - Epson Gemini User Manual

Deleting Print Jobs

1. On the Gemini monitor screen, check the EPPServer display to locate the
Look for the print
job here . . .
Determine which
printer to disable
here . . .
Click the checkbox
to disable the
printer here
2. At the bottom of the screen, click the appropriate checkbox in the
3. Once the printer is disabled, return to your workstation and start
4. When you're finished, click the
If you need to delete a waiting, spooling, or paused print job before it
prints, follow the steps in this section.
Never try to stop a printing job or prevent a job from printing by
removing a printer's paper tray. This may cause a paper jam or make
the Gemini server software lock up.
waiting, spooling, or paused print job you want to delete. Determine
which printer is assigned to print the job.
Enable/Status column to disable the printer. Any job currently printing
will finish before the printer is disabled. (If you need help using the
Gemini touchpad, see page 6-19 for instructions.)
EPPMonitor (as described on page 3-1). Locate the print job in the queue,
click its , , or
Job ID Page
screen.
button, then click
Copy
Return to Job List
Controlling Print Jobs
on the next
Delete Job
button.
3-9