Storing Files Created With Brady Workstation Software - Brady M710 User Manual

•
5. If the name already exists, a message displays asking if you want to overwrite the existing file
with that name.
•
•
When the file is saved, you are returned to the editing screen with the saved file still displayed. If you
want to remove the saved file from the screen, press FN + CLEAR. This clears the data from the editor
so you can work on a different label, but does not delete the saved file. For more about the operation
of the CLEAR key see

Storing Files Created with Brady Workstation Software

Storing files from Brady Workstation on the printer allows you to print later while disconnected from the
Brady Workstation computer. Files from Brady Workstation are stored as print jobs which contain all the
information needed to print. Print jobs cannot be edited on the printer; they can only be printed. Therefore
storing a print job this way also serves to prevent edits.
Follow the steps below to store a print job on the printer, then see
To store print jobs from Brady Workstation on the printer:
1. Make sure the printer is connected to the computer with the USB cable.
2. In Brady Workstation software, open the label file and go to the Print screen.
M710 User Manual
d. Double-tap the folder that you just created.
e. Type a name for the file and press
To choose an existing folder:
a. Double-tap the desired folder.
b. Type a name for the file and press
To overwrite the existing file, select Yes.
To go back and type a different file name, select No.
"Deleting Text" on page
Storing Files Created with Brady Workstation Software
. Proceed to step 5.
.
39.
"Opening a File" on page
File Management
82.
81