Diagnostics
Some diagnostics are not available for users. Advanced diagnostics are password protected
and to be used only with Brady Technical Support. The password is assigned by Brady.
Enter Diagnostic Mode
Use this procedure to access any of the diagnostics menus.
To enter diagnostics mode:
Press
1.
Press or to scroll to
2.
Press to scroll to
3.
When done, press
4.
Sensors
Print Engine Base (PEB) Settings
This procedure displays the PEB settings on the printer.
To view the PEB settings:
Access
1.
Press
2.
Press
3.
Press repeatedly to exit to the main menu or
4.
Rev A
Note:
A password is required to access the Advanced Diagnostics menus.
to go to the navigation menu.
Tools
Diagnostics
Diagnostic
mode (see "Enter Diagnostic Moden page 21).
to select
Sensors
to select
PEB Settings
, the press
to go to the submenu.
, then press
to exit the test.
.
. The PEB settings display results for the following:
CutLine - Lead.
Leading - Print
Print - Diecut
Diecut - Tapeout
Rocker Steps
Print - Center
21
to go to the diagnostics list.
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
to return to the PEB Settings menu.
®
BBP
30 User's Manual
Diagnostics