Maintenance; Installing Firmware Upgrades; Upgrading Via Brady Workstation Software; Upgrading Via Usb Drive - Brady M710 User Manual

7 Maintenance

Installing Firmware Upgrades

Upgrades to firmware (printer system software) are available online. For information on how to locate
the current firmware version on your printer, see

Upgrading via Brady Workstation Software

The simplest way to upgrade firmware is to use Brady Workstation software.
To upgrade firmware from Brady Workstation:
1. Connect the printer to a computer that has Brady Workstation installed. The computer must be
connected to the internet.
2. Run the Brady Workstation software and open the Printers tool, which indicates when
upgrades are available.
3. See the help in the Printers tool for more details.

Upgrading via USB Drive

To upgrade firmware using a USB drive:
1. On a computer, go to the technical support website for your region. See
and Registration" on page
2. Find firmware updates.
3. Find the most recent M710 firmware upgrade.
4. Download the firmware.
5. Save the downloaded file to a USB drive.
6. Connect the USB drive to the USB port on the printer. The printer recognizes the upgrade file
and displays a message on the touchscreen.
7. Follow the instructions on the touchscreen. When the upgrade is complete, the printer restarts.
Upgrading multiple M710 printers: Follow steps 1-4 above on the computer running Brady
Workstation software. Save the downloaded file on the computer, then use Brady Workstation to install
the upgrade on all printers. See the Printers tool help in Brady Workstation for details.
M710 User Manual
CAUTION! Do not interrupt printer power during an upgrade.
iv.
"Printer Configuration" on page 9.
"Technical Support
85