Face Plate - Brady M710 User Manual

Face Plate

The Face Plate label type is designed to be used with continuous label supply. If continuous label
supply is not installed, this label type does not display in the menu. To maintain correct spacing or add
to the label prior to cutting, you can choose to disable feeding to cut after printing.
To create face plate labels:
1. Press LABEL TYPE.
2. Select Face Plate. The printer displays the settings screen for face plate labels.
3. If you are going to set up a sequence to enter data, select Serialize to place a check mark in
the option box. If you will manually enter data, leave the box empty.
4. In the Distance Center to Center field, indicate the distance from the center of one label to
the center of the next. The minimum distance is 0.2 inches (5.08 mm).
5. In the Number of Ports field, enter the number of ports for which the label is intended. This
field is not available if you selected Serialize. In that case the sequence values determine how
many labels to create.
6. When No Feed is selected, you can manually enter data for more ports after serialized data
has been printed. (When finished printing, the printer will not feed the labels, so you can enter
data for more ports. When done entering data, press the FEED key in order to position the
label at the cut position.)
7. In the Separator list, select None, Line, or Tic to mark the division between labels.
8. In the Orientation list, select either Vertical or Horizontal. See above.
9. When finished, tap OK.
10. If the Serialize option box is checked, the settings screen for sequences displays.
a. Set up the sequence or sequences.
b. Tap OK.
M710 User Manual
Line Separator, Vertical Orientation
For instructions on setting up the sequence, see
information about serialization see
The number of terminal blocks are created as labels with the serialization characters
displayed on each label.
Tic Separator, Horizontal Orientation
"Add Serialization" on page
"Serialization (Sequential Data)" on page
Label Types
Face Plate
56. For
54.
67