Wi-Fi; Search To Connect; Manually Enter Settings - Brady BradyPrinter i3300 User Manual

Wi-Fi

Connect to a Wi-Fi network either by searching for and selecting a network or by manually entering the
network settings. Once connected, the printer can communicate with devices on that network. Devices
can only communicate with the printer using either Brady Workstation software.

Search to Connect

To connect to a Wi-Fi wireless network:
1. Make sure the printer is turned on.
2. Tap Settings.
3. On the Settings screen, select Connection.
4. Tap Wi-Fi Network to turn on Wi-Fi and choose a network from the list. If needed, the printer
displays a key pad for entering the password.
If the network that you wish to connect to is not in the list, the network may be hidden. Use the
steps in the following section to manually enter network settings.

Manually Enter Settings

Use this method for networks that are hidden.
To connect to a Wi-Fi wireless network:
1. Make sure the printer is turned on.
2. Tap Settings.
3. On the Settings screen, select Connection.
4. Tap Advanced Network Settings.
5. Select Wi-Fi from the list.
6. Tap IP Settings and then tap one of the following.
•
•
7. Tap the back button to return to the Network screen.
Get assistance from your network administrator for the remaining steps.
8. If you chose DHCP, configure the following settings.
a. Tap DNS Server (Primary) to display a keypad and then type the IP address of the DNS
b. Tap DNS Server (Secondary) and enter the IP address of the secondary DNS server.
BradyPrinter i3300
DHCP: DHCP addressing is dynamic and the system uses a DNS server to obtain the printer
IP address for you.
Static: Select static addressing to manually enter the printer's IP address.
server. Tap when finished.
Setup
Connecting the Printer
15