Printer Settings
Use the keyboard to configure standard settings, such as the language. For an introduction to the
keyboard, see
Language
When turning the printer on for the first time, choose the language in which you want all printer menus,
functions, and data displayed.
To set the language:
1. Press FN + SETUP.
2. Use the navigation keys to move through the menu until Language is highlighted.
3. Use the up and down navigation keys to select the desired language.
4. Press ENTER
Keyboards
Your keyboard configuration depends on the region where you do business. The following are the four
configurations currently supported on the M610 printer. See
Units of Measure
Set the unit of measure to inches or millimeters.
To set the unit of measure:
1. Press FN + SETUP.
2. Use the navigation keys to move through the menu until Units is highlighted.
3. Use the up and down navigation keys to select the desired unit.
4. Press ENTER
M610 Label Printer User Manual
"Using the Keyboard" on page
to accept the choice.
Keyboard Type
to accept the choice.
23.
"Keyboards" on page 88
QWERTY
AZERTY
QWERTZ
Cyrillic
Setup
Printer Settings
for layout.
8