Editing Labels On The Printer Editing Text; Positioning The Cursor; Inserting Text; Deleting Text - Brady M710 User Manual

Editing Text
If you have entered some text in error or want to change the content or format of your label, edit the
information before printing.

Positioning the Cursor

The cursor is a vertical line that marks the position on the label where text or other data will be entered.
See "Using the Touchscreen" on page
To position the cursor when editing text, either tap the touchscreen where you want to place the
cursor, or use the navigation keys. See

Inserting Text

To insert additional text within a line of text:
1. Position the cursor at the point where text should be inserted.
2. Enter the text. Existing data positioned to the right of the cursor moves progressively to the
right to make room for the inserted text.
•
•
•

Deleting Text

To remove characters one at a time:
1. Position the cursor to the right of the rightmost character that you want to delete. See
"Positioning the Cursor" on page
2. Press
M710 User Manual
If a fixed font size is selected, when the end of the line is reached, no more data can be inserted.
To add more data, either press ENTER to start another line or decrease the size of the font. (To
set default font type and size see,
a line of text, see "Font Size" on page 40
If the font size is set to Auto, as more data is added to a line of text, the font size automatically
decreases a point at a time until the smallest font size is reached. When the maximum
character limit is reached an error message displays. To remove the error message, press
ENTER or tap the error message screen.
Press ENTER to start another line of text.
repeatedly until all the characters that you want to delete are removed.
25.
"Navigation and Selection Keys" on page
"Font" on page 11. To change the font attributes or size for
or "Font Attributes" on page
39.
Editing Labels on the Printer
Editing Text
30.
41.)
39