Gigaset N670 IP PRO Installation, Configuration And Operation page 82

Hide thumbs Also See for N670 IP PRO:
Table of Contents

Advertisement

System settings
Reset to factory settings
All configuration settings can be reset to the factory default. This will delete all settings, discon-
nect all connections, and terminate all calls!
When resetting to factory defaults all settings are lost. You can save your current
configuration previously (
Factory reset can also be performed by using the device key.
Defining the role
From the Reset to device option menu, select the role the device should have after the reset.
Base only
The device is used as base station.
All in one - dynamic IP
The roles Integrator + DECT manager + base station are active. The network config-
uration is set to dynamic IP.
All in one - static IP
The roles Integrator + DECT manager + base station are active. The network config-
uration is set to the following static IP settings:
IP address:
Subnet mask:
Gateway:
All in one + internal telephony - dynamic IP
The roles Integrator + DECT manager + base station are active. Multiple lines (SIP
accounts) can be assigned to the handsets. Internal calls between handsets regis-
tered to the base are possible. The network configuration is set to dynamic IP.
DECT-Manager+Base - dynamic IP
The roles base station + DECT manager are active. The network configuration is set
to dynamic IP.
DECT-Manager+Base - keep IP
The roles base station + DECT manager are active. The network configuration is set
to static IP.
All in one is the default setting for a Gigaset N670 IP PRO. All three components are
active in one device (Integrator + DECT manager + base station).
The roles DECT manager + base station are intended for the operation behind an
external Integrator (available at a later time). The Integrator allows several base
stations at different locations to be managed centrally.
The Base only role can only be assigned to a device that should be used as slave in a
mini multicell system. The device cannot be used as base with a DECT manager of a
multicell system.
82
p. 80).
192.168.143.1
255.255.0.0
192.168.1.1

Advertisement

Table of Contents
loading

Table of Contents