Gigaset N670 IP PRO Installation, Configuration And Operation page 104

LDAP directory – configuration example
Name filter
The name filter determines which attributes are used for the search in the LDAP database.
Examples:
(displayName=%)
(|(cn=%)(sn=%))
LDAP does not distinguish between upper and lower case in the search request.
Number filter
The number filter defines which attributes are used in the automatic search for a directory entry.
The automatic search is performed when a phone number is entered and in the case of an
incoming call with calling line identification. If an entry is found for a phone number, the display
shows the name instead of the number.
Entries are only found and displayed if the stored phone number matches the entered phone
number exactly.
Examples:
(homePhone=%)
(|(telephoneNumber=%)(mobile=%)(homePhone=%))
104
The attribute displayName is used for the search.
The percent sign (%) is replaced with the name or part of the name
entered by the user.
If you enter e.g. the character "A", the phone searches the LDAP database
for all entries in which the attribute displayName begins with "A". If you
then enter a "b", it searches for entries in which the displayName begins
with "Ab".
The attributes cn or sn are used for the search.
If you enter e.g. the character "n", the phone searches the LDAP database
for all entries in which the attribute cn or sn begins with "n". If you then
enter an "o", it searches for entries in which the attribute cn or sn begins
with "no".
The attribute homePhone is used for the search.
The percent sign (%) is replaced with the phone number entered by the
user.
If you enter the numbers "1234567" when dialling, the phone searches the
LDAP database for entries with the private phone number "1234567".
The attributes telephoneNumber, mobile and homePhone are used for
the search.
If you enter the numbers "1234567" when dialling, the phone searches the
LDAP database for entries with the private or mobile or work number
"1234567".