Gigaset N670 IP PRO Installation, Configuration And Operation page 48

Mobile devices
Internal nr
Only when the device is in All in one + internal telephony - dynamic IP mode.
Select the internal call number under which the handset can be reached by other handsets
registered on the same base station.
Internal name
Only when the device is in All in one + internal telephony - dynamic IP mode.
Enter an internal name for the handset. It is shown in the handset idle display.
De-registering handsets
In the handset list click on
Registered.
From the RegStatus option menu select To deregister.
registered.
DECT de-registration successful:
DECT de-registration not successful: The handset stays in the Mobile devices list with
Settings for the handset
When registering a handset you can define important settings and assign functions at the same
time.
Personal provider data
Provider data is not required if you operate the device in All in one + internal telephony -
dynamic IP mode (
assignment ( p. 41).
Configure the VoIP account for the handset. If the handset is successfully registered,
shown in the SIP column in the Mobile devices list.
The VoIP/PBX account must be set-up beforehand (
VoIP provider
Choose a configured VoIP PBX/provider from the option menu.
The connection must be configured on the Provider or PBX profiles page (
Enter the access data for the VoIP account in the relevant fields. These fields may vary
depending on the PBX/provider profile.
Authentication name
Specify the SIP authentication name. The Authentication name acts as access ID when regis-
tering with the SIP proxy/registrar server. It is usually identical to the phone number for the
VoIP account. Value: max. 74 characters
48
next to the handset you want to de-register. The status is
The handset is deleted from the Mobile devices list.
status To deregister.
p. 9). In this case, the handsets receive the provider data via SIP account
Click on Set . . . the handset is de-
p. 33).
p. 33).
will be