Gigaset N670 IP PRO Installation, Configuration And Operation page 74

System settings
Showing detailed information on the license currently used
Click on Show licence status . . . the name of the license package, the license status and the
activation time is shown.
Uploading the license file
Your distributor will send you the license activation file.
Click on Browse...
computer. Click on Upload . . . the license will be enabled.
Grace period
•
After the first start-up and after each full factory reset an installation can be tested for 35 days
without any limitation and any purchased license (grace period). In the Status column the
remaining days of the grace period is shown.
•
After 35 days the message Check license status will be shown on all registered handset for
additional 35 days. The Status column shows Grace period - expired. The system will still stay
fully functional.
•
After a total number of 70 days after first startup/factory reset the number of parallel calls will
be reduced to 1 call per connected DECT manager, unless a valid license file will be uploaded.
•
The Messaging and Location licences do not have a grace period. Instead, test licenses for
Messaging and Location are granted for one handset.
Master DECT manager
As the virtual integrator is not a physical device, a master DECT manager must be defined for
licensing via DECT manager administration. The license is assigned to the MAC address of the
master DECT manager.
If the master DECT manager is broken and replaced, the license is not valid anymore. You have
one month to request a new license file.
74
Select the previously saved license file from the file system of your